DeView LCD Monitor Manuel d'instructions

10.4” Dual Rack Mount TFT-LCD Monitor INSTRUCTION MANUAL Please read this manual thoroughly before use. Keep it handy for future refere

- 10 -Features  General  10.4” (800 x RGB x 600) TFT LCD Panel.  Advanced control OSD menu.  Brightness of 220 cd/m²  High contrast of 400

- 11 -Resolution Support  VGA resolution table Resolution Symbol H Freq. V Freq. Pixel Remark 640 x 480 640-60 31.469 59.941 25.175 VESA

- 12 -Operating Instructions Control Power Monitor ON / OFF. At OFF mode, monitor will be in standby status. Light indicates: G

- 13 -Backside Connections ○1 DC POWER IN: DC12V power input. ○2 RIGHT MONITOR CVBS2 IN: composite video signal input for CVBS2 channel. ○3 RIGH

- 14 -OSD Architecture OSD Menu Tree CVBS

- 15 -OSD Architecture OSD Menu Tree VGA

- 16 -OSD Architecture CVBS Setup (Picture) Brightness 50 Contrast 50 Saturation 60Hue 50 Sharpness 0 Back Light [ Strong ] Exit OSD ▼▲ Pi

- 17 - OSD Architecture VGA Setup (Picture) Brightness 50 Contrast 50 Back Light [Strong]Color temp. [ Cool ] Color Adjust ▼▲ Exit OSD ▼▲

- 18 - OSD Architecture VGA Setup Brightness 50 Contrast 50 Back Light [ Strong ]Color Temp. [ User ] Color Adjust ▼▲ Exit OSD ▼▲ Pictur

- 19 - OSD Architecture VGA Setup Auto Adjust ▼▲ H. Position 50 V. Position 50Clock 50 Phase 71 Exit OSD ▼▲ Picture VGA Press Enter Key

2 * * * WARNING * * * This equipment has been tested and found to comply with the Class A digital device‚ pursuant to part 15 of

- 20 -OSD Architecture General Setup Power On Default [ CVBS 1 ] Language [ English]OSD Timeout 10 Reset ▼▲ Exit OSD ▼▲ Setup CVBS1 Pres

- 21 -Mounting Guide Rack Mounting 1 Line up the 3 mounting guides on each side of the monitor with appropriate holes in the rack 2 Insert an

- 22 -Typical Device Connections

- 23 -Dimensions

- 24 -Specification LCD Size 10.4" Pixel Type Normal white Max. Resolution 800 x RGB x 600 Aspect Ratio 4:3 640 x 480 @ 60/72/75 Resolution

- 25 -Appendixes Check the information in this section to see if the problems can be solved before requesting repair: Problem: No Power indicate

- 26 -Appendixes Problem: Uneven color or color too dark  Use OSD “Picture” function to adjust color setting. (please refer to page 16 for CVBS1/C

- 27 -Memo

3Precautions  Safety Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the qualified personnel befor

4FCC COMPLIANCE STATEMENT THIS PRODUCT CPMPLIES WITH CARIOUS OTHER REGIONAL AND SAFETY REGULATIONS SUCH: FCC, CE. THESE CERTIFICATIONS ARE NOTED ON

5Important Safeguards 1. READ INSTRUCTIONS --All the safety and operating instructions should be read before the appliance is operated. 2. RETAI

6Important Safeguards 14. OBJECT AND LIQUID ENTRY --Never push objects of any kind into video monitor or equipment through openings as they may touc

7Installation Guide Accessory All of the accessories have been tested and qualified. Do not use any non-qualified accessories with this LCD monit

- 8 -Contents  Warning ……………………………………………………2  Precaution ……………………………………………………3  FCC Compliance Statement ……………………………………4  Important Safeguards

- 9 -Quick Installation when using with a PC 1 Connect power cord 2 Connect video cable • Make sure both the LCD display and computer are